• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

2000 TB / Intake to 1988 Renix XJ

kremlin said:
I've a 2000 TB / Intake to 1988 Renix XJ. What mods can be done to get this to work properly ? :phone:

I'll get to you before you get jumped on - you really should search, with keywords like "HO Throttle Body." I know this has been covered - in depth - with pictures - here. I just don't have a link handy...
 
kremlin said:
I've a 2000 TB / Intake to 1988 Renix XJ. What mods can be done to get this to work properly ? :phone:
For it to work properly you need to get an HO head and bolt it to your Renix block. You will also need to modify your TPS. Like 5-90 said, it has been covered extensively here, if you use the search function looking for my name associated with the threads you will find a ton of info.
 
I don't think he can use the 2000 TB but I could be wrong. I can't remember if it was 2000 or 2001 that the TB was changed. Different sensors.

Its early...I may be thinking of the 2003 rubicon. The TB was a different setup, different sensors, different cabling.

End result...a TB from 92-99 will work on an 88 easily. Just adapt the TPS spacer. All other sensors bolt up.
 
To make this swap work you will also need from a H.O.;

1.Power steering bracket w/ tensioner
2.96+ XJ Power steering pump
3.H.O. Throttle cable
4.H.O. Fuel rail
5.Air box to TB hose

You will also need to extend the fuel lines and fabricate the Renix-H.O. TPS adapter.

To get the most out of this swap you will also want the H.O. cylinder head. Whether or not your renix is got piston slap (mine did, bad) you may as well just get a whole motor from the U pull it yard from a 96+ and drop in.
 
5-90 : ! Thanks for the Intro. !

90PioSport99 : I'm on page 5 of your 34 pages of threads - Primo Site.

I'll find a 7120 '93 head somewhere for this 1982 Eagle 2dr.
Sedan project.

Bouncy : I'll research the Throttle Bodies & get the best 'Yardage' -
how about something from a FORD or Nippon - ?


summitlt : It's easier to identify when nothing else matches !


Slo-Sho : My 1989 XJ 5spd.
175K Renix has - no piston slap yet !


This Eagle 2dr. Sedan has a 258 with a rebuilt trans and a
50K 258 parts car.

I have an '88 Cherokee ECM / TCM / Intake etc. and a
harness 'cut cleanly' at the firewall in the parts box -
along with an AW4 bell housing in case I don't like the
wider Torqueflite gearing.
Also have an '84 4spd stick
Eagle parts wagon.

I'd like a serpentine belt system -

A Renix exhaust header is needed for the exit path in Eagles.

Has anyone laid out how to sort out a Harness for Renix
EFi conversion ?


I could yank the powertrain & swap in a '96 Up, but the
258 is healthy + I have a 50k 258 + the orig. Torqueflite is
'Fresh' + I like and want a ReniX EFi system - so it seems
I'm in for the full Tour!

......... more weekend reading Ahead...... thanks gents !
 
Back
Top