View Single Post
  #37  
Old October 26th, 2019, 15:26
lawsoncl lawsoncl is offline
NAXJA Forum User
 
Join Date: Jan 2006
Location: North Idaho
Posts: 5,196
Re: TPS ohm issue, renix 1990 i6 automatic.

Quote:
Originally Posted by 90XJ_Seth View Post
Major Update:

A few updates to my system. I traced down the wire harness and found that it was reading 2.4 ohms all the way to the factory crimps and past that to the left of the grounds. I opened the wire harness further and it still reads 2.4 ohms. I then added a ground directly to the block from the terrible factory crimp and voila .7 ohms all the way to the TPS and MAP so I could reuse those wires if I need to.

It's been a while, but I thought one of the brown wires in that crimp went to the ground point by the dipstick. You removed, cleaned, and reinstalled that grounding point, yes?
Reply With Quote