View Single Post
  #2  
Old July 27th, 2012, 06:53
Talyn Talyn is offline
NAXJA Forum User
 
Join Date: Apr 2003
Location: Radford, Communistwealth of Virginia
Posts: 7,335
Re: Performance 4.0 build

You still have a 4.0L displacement. The injection system will not need to be modified. The 2000 doesn't have 19lb injectors, but 22.5lbs. You need the older style valves to use the MP locks. I would also do a 30* back cut on the intake valves. I would also recommend using a solid pin on the cam instead of the pin and spring setup. If you have the time you could polish the rods and clean up the crank a bit.
Reply With Quote