View Single Post
  #5  
Old December 13th, 2007, 19:12
5-90's Avatar
5-90 5-90 is offline
NAXJA Forum User
 
Join Date: Mar 2003
Location: Hammerspace
Posts: 18,821
Re: 0331 to 0630 Swap Kit

The "threaded port" on the back of the #0630 head for the temperature sensor should be threaded 1/8"-27 NPT (as I recall,) so you can also just get a brass plug from the hardware store to close that hole off. Use some Teflon paste to ensure a good seal (or you can go ahead and use a sensor there to drive a gage, or just leave the OEM sensor in place if you don't mind doing that.)

Just an FYI...