Hubjeep
NAXJA Forum User
- Location
- Long Island, NY
Howdy,
Been a long while since I posted on any forum, but got a problem with my 1999 238,000 mile XJ 4.0L.
While replacing the floor pans I replaced the NSS since I had to wiggle the shifter to start and to get reverse lights to come on sometimes.
Shortly after my check engine lights comes on with P0705, so I buy another new switch (also aftermarket) and the code comes back! I found the wiring diagram and checked continuity between the wires and they are good.
Weird thing... when in reverse both backup lights come on, but when I step on the brake the passenger side one shuts off!!! CEL means it fails NYS inspection. :gonnablow
Any ideas? Thanks!
-Hub
Been a long while since I posted on any forum, but got a problem with my 1999 238,000 mile XJ 4.0L.
While replacing the floor pans I replaced the NSS since I had to wiggle the shifter to start and to get reverse lights to come on sometimes.
Shortly after my check engine lights comes on with P0705, so I buy another new switch (also aftermarket) and the code comes back! I found the wiring diagram and checked continuity between the wires and they are good.
Weird thing... when in reverse both backup lights come on, but when I step on the brake the passenger side one shuts off!!! CEL means it fails NYS inspection. :gonnablow
Any ideas? Thanks!
-Hub