• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

97+ wiring

cody4359

NAXJA Forum User
Location
tacoma, wa
My 97+ swapped mj had a hack wiring job done when I bought it. Long story short, bought a parts rig, striped it for the wiring harness and have thinned that out and it's now in my jeep which is all 97+ other than the taillight harness which I'm trying to figure out.

Current problem: hazards work only when headlights and key are in off position. Blinkers sometimes work, can't get them to right now. Any insight of what would cause this, I have a FSM and it's all kinda foreign to me. I can read most of the pinouts but diagrams leave me lost.

The parts rig is a '99 and the jeep runs now. Just having accessory issues. Also, there is no door diner when it's open or leaving keys in etc

Sent from my SM-G900V using Tapatalk
 
Back
Top