bonesxj
NAXJA Forum User
- Location
- running springs,ca
What is the operating water temperature for a 1989 XJ, with a 4.0L ? My local dealer does not seem to know the right answer..Go figure...:firedevil
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
temp.
- Thread starter bonesxj
- Start date
GrimmJeeper
NAXJA Forum User
- Location
- Gardena, CA
89? still a renix jeep? my renix runs just below 200, the HO is around 210.
this would be on the gauge, not official numbers or anything.
this would be on the gauge, not official numbers or anything.
88 Wagonman
NAXJA Forum User
- Location
- Boise, ID
The 4.0 requires a 195* thermostat so I guess it would depend on where you take the temp reading. If you are going off the gauge then go with what GrimmJeeper said. Mine cycles from 195 to 210 regularly and the wife's will stay right at 210 unless it's above 95 outside then it will run about 220.
- Location
- Bakersfield, CA
It has a 195* thermostat and the aux fan comes on at 210*, so between there is the normal operating range.
bonesxj
NAXJA Forum User
- Location
- running springs,ca
Thanks, for the information. It has been running at about 180` to 185`. If it gets above 95` air temp. the water temp. will get to about 210-215. going up hill, so I guess I do not have a cooling problem. I 'am just to used to cooler running engines.
