HELP!!! Need 99 Wiring info

HELP!!! Need 98 Wiring info

If anyone has an FSM for a 98 XJ, read on.

I'm in dire need of the wire colors for the shift solenoids as shown on page 8W-31-XX (not sure of the last numbers).

I've got a 97, '00, '01 FSM so of course I need the '98 colors.

Trying to go wheelin tomorrow and really need this info.

Thanks folks!!

You mean this?

Yeah, but I typed the wrong year. Should be 98.

Corrected the OP.

Here's what I actually have on the rig:
Input sensor Wires are bk/rd and Y/bk

Output is bk and wt/vt

I'm left with:
wt/bk
lt bl/wt
vt/wt

ARGHHHHHHH!!! I hate not having the info I need at my finger tips!! Coulda been done a long time ago!

Don't have the 98. The 97 shows the same colors but adds the output shaft speed sensor color. (You said you had the 97 so I didn't post.

Ok.

I'm looking at a print right now.

Per FSM

Lock-up Solenoid is sheet 8w-31-3
Shift lock solenoid 8w-31-6
Torqe convrt solenoid 8w-31-2



For Solenoid No.1 Control is wire no.12 from the TCM

For Solenoid No.2 Control is wire no.13 from the TCM

For TCC Solenoid Control is wire no.11 from the TCM

It appears that all of the solenoids ground out internally in the trans.


"I'm left with"

wt/bk [ Is wire No.6 to the TCM "CCD BUS (-)
lt bl/wt [Could this be a DB/WT? If so, this is wire No.26 to the TCM
"Fused IGN. (ST-RUN)]
vt/wt [ Is wire No.1 to the TCM "range sensor low sense" from you NSS.

Hope this helps

Now, go get ready to wheel

buzz.

Got it figured oiut yesterday, thanks though.