• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

91 XJ NP231 front output angle

foggybottombob

NAXJA Forum User
Does anyone know what the front output shaft angle is for an NP231 on a '91 XJ with an AW4? I had to put my XJ in a shop and that is one measurement I did not get before we took it. I'm working on getting a front Waggy D44 axle ready to put in.
 
I'm sure 5-90 or one of the other xj gurus will chime in shortly... I have seen the front shaft ran at all sorts of angles but I'm sure there is a recommended range...
 
I don't mean the drive shaft. I just mean what is the output shaft angle of the front NP231 shaft. It is probably the same for all XJ's with an NP231 from the factory.

For instance, the dana 300 in an 80's model CJ7 is 6 degrees down in back and 6 degrees up in front from the factory. It's that number I need for the XJ NP231.
 
Back
Top