shawnxj
NAXJA Forum User
- Location
- portland, tx
ok so i disassembled my entire front diff and managed to trash the bolts holding my hubs to the knuckles. so where do i get new bolts from? or should i just go buy some grade 8 bolts?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
hub bolts
- Thread starter shawnxj
- Start date
winterbeater
NAXJA Forum User
- Location
- Royal Oak, Michigan
If you can find the same or better bolts, you're better off buying them at your cheapest source.
ColoradoRaptor
Headbanging Hillbilly
- Location
- Canon City, Crawlorado
Start at your local pick and pull!
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
They aren't terribly expensive at the dealership.
1985xjlaredo
NAXJA Forum User
- Location
- Kansas City
So what did you end up doing?
5-90
NAXJA Forum User
- Location
- Hammerspace
M8-1.25 socket heads, match the length under the head. Hardened flat washers might not hurt - you can use 5/16" hardened washers if you can't find them in M8 (they're close enough to the same size it really doesn't matter.)
Hex head capscrews should be at least Property Class 10.9 for that application.
Hex head capscrews should be at least Property Class 10.9 for that application.
