Rear bump stop question

D

Deadman 94 xj

NAXJA Forum User

Location

Pittsburgh, PA

• Feb 7, 2009

• #1

Where can I find some rear bumps with some length. I've seen polyperformance 4.5", are there any longer without making your own?

The 4.5's may be enough, just wondering if there were any other options.

 

R

RCP Phx

NAXJA Forum User

Location

Phoenix,Az

• Feb 7, 2009

• #2

What kind of crazy lift are you running?

 

P

PstrKd4BrthCntrll

NAXJA Forum User

Location

Chicago

• Feb 7, 2009

• #3

get a peice of square tubing anand drill holes through it and get longer bolts and bolt the bumpstops through the square tubing. Kinda like how some TC drops are,...

 

98XJSport

Destiny is the rising sun

Location

Western Maine

• Feb 7, 2009

• #4

Or cut a piece of channel to the desired length and weld a plate on top and bottom to make an I. Drill holes in the aligning places, away you go...

Never seen any longer than what you have, so making your own may be your only option. Or contact some of our site sponsoring vendors, they may be able to modify some for you.

 

Tim_MN

Freakish Hand Strength

NAXJA Member

Location

Minneapolis, MN

• Feb 7, 2009

• #5

Make some bump stop spacers to lower your rubbers. Fabricate a raised bump stop pad on the axle similar to an upside down leaf spring pad. Or buy some adjustable pads from DPG -http://jeepinoutfitters.com/scripts/prodView.asp?idproduct=752

 

D

Deadman 94 xj

NAXJA Forum User

Location

Pittsburgh, PA

• Feb 7, 2009

• #6

RCP Phx said:

What kind of crazy lift are you running?

Click to expand...

Not much. Just around 6.5. I just want a little more stability in the rear.


Thanks for the replies. Sounds like I might have to make my own.