xJeepxXJxThingx
NAXJA Forum User
- Location
- iowa
i have a 93 xj 4.0 ho with a aw4 and was wondering how hard it is to do and how to do it.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Rear Main Seal
- Thread starter xJeepxXJxThingx
- Start date
squirrel80
NAXJA Forum User
- Location
- Prescott Valley, AZ
Just talked about yesterday. Try searching around a little bit.
Here is a good post on what you need to do.
http://www.naxja.org/forum/showthread.php?t=101118
Here is a good post on what you need to do.
http://www.naxja.org/forum/showthread.php?t=101118
xJeepxXJxThingx
NAXJA Forum User
- Location
- iowa
so once i remove my pan i will see the bearing amd behind those is the rear main?
xJeepxXJxThingx
NAXJA Forum User
- Location
- iowa
it doesnt seem to be my rear main seal its leaking right above my oil filter so im guessing my oil pump how hard are these to replace
xJeepxXJxThingx
NAXJA Forum User
- Location
- iowa
yea just realized what i said but it is the OFA does anyone know what size socket it takes to get it out im guessing torx
frozen chosen
NAXJA Forum User
- Location
- North Dakota
T70 on a 96...
xJeepxXJxThingx
NAXJA Forum User
- Location
- iowa
Yea i was told 45 55 then 60 so hopefully your right and its 70 your the second one to tell me this.
sw4218
NAXJA Forum User
- Location
- North Carolina
My 93 XJ takes a 9/16" Hex. Check it before buying the torx.
xJeepxXJxThingx
NAXJA Forum User
- Location
- iowa
the t70 fits but now it wont come out and it fells like its starting to strip out the torx bolt i dont knpw where to go from here
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
