• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Does any one have 2001 seats in a older xj?

Unbolt 01's seat bracket, replace with 94's seat brackets. Modify to fit.

Shouldnt be any harder then that.
 
heres what i did this afternoon...
started w/ some flat bar... 2x 13", 1x 15",
drilled out slots to fit the bolts that connect the seat to the bracket, from 2, 1/2" from the outside, to 4 1/2" from the outside... enough for some wiggle room...

take the 15" peice, and connect the two existing center brackets... like this.... and weld on. this is the passenger side seat...



here, side by side, passenger on left, drivers on rigt...
,
connect your 13" peices to the old renix bracket... of the appropriate side...



allign it... and tack....


remove bracket, and finish weld... the flatbar doesnt meet up perfectly, and i needed little filler peices, 1/4" strips of flatbar....

 
Back
Top