XJLI
NAXJA Forum User
- Location
- Long Island, NY
the part that goes INTO the axle tube, where do i find this? no one online has it as far as i know, and the dealer by me is useless since 44s havent been made since 89.
any ideas?
any ideas?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
D44 breather tube
- Thread starter XJLI
- Start date
fyrfytr1717
NAXJA Forum User
- Location
- Turlock, CA
I drilled and tapped the breather hole in my axle tube to accept the threaded banjo bolt / breather combo that is used on the current Dana axles. I then just sealed up the hole that the original banjo bolted up to.
XJLI
NAXJA Forum User
- Location
- Long Island, NY
i have a YJ line on there now... no banjo bolt on that. im taking a trip to lowes tomorrow to see if they have some barbed fitting that will work.
aparke4
NAXJA Forum User
- Location
- Atlanta, Ga
sorry i just threw it away! drilled and tapped for a fitting - ran some coiled air line up- done
