• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Quick Question NP228 TCase

Gpup

NAXJA Forum User
Location
Louisville, KY
Has anyone replaced the vacuum actuator with a cable op in the NP228 TCase. I have searched and searched the database and have come up with only one post, NP228/229 Vacuum 2wd/4wd- Cable swap? (posted by barillms 5/05) but no one answered the question. barillms was kind enough to send me some information on what needed to be done, but didn't have any pics or procedures. He indicated that someone out here has done it and helped him out but he couldn't find the pictures/procedures.

Gpup - 86 XJ 2.8V6 - NP228 bone stock (for now) with 65K actual miles
 
Hi:
I got that ole NP228 also behind a Chevy 350 LT1 and 700R-4 tranny and there is online a vendor manufactured unit called Skyjacker Rock Ready Shifter Bracket that might work for your purposes-In my case I just fired up my trusty Miller MIG and fabbed me up something to replace the stock unit-
Hope this helps.
 
Back
Top