jwtrapper
NAXJA Forum User
- Location
- Wetmore, CO
For thoes of you running full width what is the outside measurement. From outside of your tire to outside of your tire. Also what are you running for rims.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Full Width, Width?
- Thread starter jwtrapper
- Start date
WaXJ_Skier
NAXJA Forum User
- Location
- Bellevue, Wa
should be pretty east to calculate. WMS to WMS+ 2(rim width - BS)
so say you have a 65" wide axle with 10" 5"BS wheels
65 + 2(10-5) = 75" + plus anything if the tires bulge out any.
so say you have a 65" wide axle with 10" 5"BS wheels
65 + 2(10-5) = 75" + plus anything if the tires bulge out any.
mscans
NAXJA Forum User
- Location
- west palm beach, florida
87.5 outside measurement, 38.5x15x15 boggers on 15x12 rims, 4.0 backspacing.
madmax
NAXJA Forum User
- Location
- Woodburn, OR
i have a 76 hp 44 9" w/ 37 12.5 MTRs on 8"diy beadlocks w/ 4" backspace i'm 81" bubble to bubble
Sierra Drifter
NAXJA Forum User
- Location
- San Ramon Ca
Mine is 81". 68 inch wms, 17x9 cragar steel wheels with 5 inch backspacing, 37x12.5x17 MTRs.
- Location
- Port Orchard, WA
mine is right at 80"
1976 Full width HP44
65" WMS-WMS, 15x8's, 3.75" BS, 12.5 wide tire
1976 Full width HP44
65" WMS-WMS, 15x8's, 3.75" BS, 12.5 wide tire
jwtrapper
NAXJA Forum User
- Location
- Wetmore, CO
Thanks, that is exactly what I was looking for. I am at 80" right now and it works realy well. I am not going to swap out axles for a while but it is nice to know exactly where it will be sitting when I do.
