SeansBlueXJ
NAXJA Forum User
- Location
- Plainfield Township, PA
Ok in relation to my earlier post where all my issues began, http://naxja.org/forum/showthread.php?t=962001 I have some new issues, I ran the veh self check for codes using the method from go-jeep's website, http://go.jeep-xj.info/HowtoECUcodes.htm. It pulled code 24 (OBD 1 i guess?), "TPS voltage sensor input above or below the minimum acceptable voltage. Or TPS signal does not correlate to MAP sensor."
After some resarch that translates to one of 3 indvidual "P" codes as if i had run it with a scanner. 121, 122, or 123. which basically isolates one of the 3 parts of the above, high voltage, low voltage or not correlate. So now what do I do to fix? Help please?? I will run to auto zone at lunch and have them pull the code to isolate which one, but I would still not know where to go with it once i know.
thanks guys!
After some resarch that translates to one of 3 indvidual "P" codes as if i had run it with a scanner. 121, 122, or 123. which basically isolates one of the 3 parts of the above, high voltage, low voltage or not correlate. So now what do I do to fix? Help please?? I will run to auto zone at lunch and have them pull the code to isolate which one, but I would still not know where to go with it once i know.
thanks guys!
