Kiefer316
NAXJA Forum User
- Location
- Littleton, Crawloardo
is it easy to pound in studs to a hub assembly
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
hub question
- Thread starter Kiefer316
- Start date
8Mud
NAXJA Forum User
- Location
- Central Germany
I don't usually pound studs into anything. I turn a lug nut around backwards and tighten it to pull the stud in. The front studs have an unthreaded portion, you may need a stack of washers (as spacers) to seat it all the way.
I don't think there are any clearance issues? The stud should go in from the back, best to double check though.
I don't think there are any clearance issues? The stud should go in from the back, best to double check though.
Kiefer316
NAXJA Forum User
- Location
- Littleton, Crawloardo
okay thanks that will save me a trip to a shop tomorrow just gotta find some spacers to use for them dont have any washers that wide thanks mud
