sprngfldxj
NAXJA Forum User
- Location
- Springfield, Colorado
Ive been doing some tuning up and cleaning up on the xj. As i was working up front, I noticed something that I had not seen before and wondered of it was normal??
Both front coils are Rusty's 405, RE drop brackets, NthDegree AUCA, RE SF Lower NACA. The left upper spring perch has a yellow spacer about 1/2 inch or so, as well as the factory isolator, and the coil is nice and straight up and down. The right spring perch has no spacer except the factory isolator and yet the spring seems to bulge forward as if it was being compressed.
I checked the adjustment on the UCA's and they have same measurment from eye to eye. Drop brackets are lined up right, and My alignment was adjsuted just recently.
Any Ideas?
Is it normal?
If that is not enough info, please let me know and I will do what I can.
Both front coils are Rusty's 405, RE drop brackets, NthDegree AUCA, RE SF Lower NACA. The left upper spring perch has a yellow spacer about 1/2 inch or so, as well as the factory isolator, and the coil is nice and straight up and down. The right spring perch has no spacer except the factory isolator and yet the spring seems to bulge forward as if it was being compressed.
I checked the adjustment on the UCA's and they have same measurment from eye to eye. Drop brackets are lined up right, and My alignment was adjsuted just recently.
Any Ideas?
Is it normal?
If that is not enough info, please let me know and I will do what I can.
Last edited: