• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

1.75 front spacer (winch bumper)

I wouldnt worry about it,, With my winch bumper/ winch and suck down winch it maby makes the front settle .5-.75 inches at the very very most..
 
What spring rate are you running,the math after that is easy!
 
maybe2fast said:
stock
Click to expand...

Measure from the center of the front crossmember(under the radiator) to the ground, then have someone who weighs about 150 lbs stand on the front bumper while you remeasure.
Subtract the second measurement from the first, that will give you an idea. ;)
 
currently have the winch off for repairs (70lbs), gain 1/2" up front.
plan on buying new coils and acos and burning my spacers, you'll learn they suck ass.
 
maybe2fast said:
what are acos
Click to expand...

Adjustable Coil Over Spacer.

Aka Waste of money. Get a cheap poly spacer
 
you could measure how far down it sits then if you have access to a lathe, turn the poly spacer down to the correct height to make up the difference. a little overkill but that never hurt anyone
 
You must log in or register to reply here.

Similar threads

B
Passenger Side Riding Low - Any remedies?
Replies
1
Views
2K
Tim_MN
Tim_MN
G
Are XJ and TJ Front Bump Stops the Same?
Replies
6
Views
752
XJEEPER
XJEEPER
M
Looking for some advice/input.
2
Replies
22
Views
5K
Evan03
E
B
96 XJ, 16” Jeep Icon Rims& Wheel Spacers
2
Replies
24
Views
3K
XJEEPER
XJEEPER
J
Rear Bumper fabrication/strength questions
Replies
2
Views
2K
Joshua13
J
Back
Top