phreaker76
NAXJA Forum User
- Location
- Palmdale
Just curious if anyone knows. If I had a cps problem wouldn't I still be getting spark? I don't have a spark right now so I'm thinking it's probably a coil issue.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
CPS?
- Thread starter phreaker76
- Start date
phreaker76
NAXJA Forum User
- Location
- Palmdale
Sorry I didn't mean to post here. My bad
Gerr
NAXJA Forum User
- Location
- River Drive Norco Ca 92860
actually it could be why you dont have spark its kinda the part that tells the pcm when and where
phreaker76
NAXJA Forum User
- Location
- Palmdale
is there a way to test the cps? Or is it just replace it and hope to hell it works?
Gerr
NAXJA Forum User
- Location
- River Drive Norco Ca 92860
basicly un-plug it connect a multimeter to it and a ground source then crank the motor and if it creates a voltage signal than it is good. keep in mind it is a pulsing signal of only 5 volts or less so you will need to have a fast capture multimeter or a analog one to really see the pulses but any old one will give you a average of the pulse voltage
phreaker76
NAXJA Forum User
- Location
- Palmdale
Ahh thanks that should save me some trouble dealing with those nuts on the bellhousing unless I have to.
xDUMPTRUCKx
NAXJA Forum User
- Location
- highway to hell
with a dirty cps connection you will NOT get spark in most cases....ask me how i know.....lol.
Unplug and clean the connections for the cps and it should fire right up!
Unplug and clean the connections for the cps and it should fire right up!
