CAS22
NAXJA Forum User
- Location
- Raleigh, N.C.
Are 4.56 gears going to howl or whine in a chrysler 8.25? If anyone has had this experience, what does it sound like? Is it more significant than driving on aggressive tires?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
4.56 in 8.25
- Thread starter CAS22
- Start date
JNickel101
NAXJA Forum User
- Location
- Alamogordo, NM
not if they're set up right....
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
They won't be heard if they are set up right. Pinion bearings are shot. Yes, It's annoying as HELL!
IntrepidXJ
NAXJA Member #647
- Location
- Grand Junction, CO
JNickel101 said:
x2
i'm running 4.56's in my 8.25 without any noises.
setup is the most important part
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
Does the stock carrier support 4.56 gears?
IntrepidXJ
NAXJA Member #647
- Location
- Grand Junction, CO
lowrange2 said:
yes
IntrepidXJ
NAXJA Member #647
- Location
- Grand Junction, CO
sunburned said:
you will need to grind down the corner of a tooth or two on the ring gear in order to get the cross pin in and out with the 4.56's
Sting25
twitter.com/cmchadwick
- Location
- Wheat Ridge, Colorado
Here's the writeup on my gears.
http://www.naxja.org/forum/showthread.php?t=915011&highlight=sting25+gears
Thanks Terry!
http://www.naxja.org/forum/showthread.php?t=915011&highlight=sting25+gears
Thanks Terry!
billyjp2
NAXJA Forum User
- Location
- Indian Orchard MA
CAS22 said:
you'll know. its not one of those "turn the radio up and it'll go away" noises
chzbrgr
NAXJA Forum User
- Location
- Eldersburg,MD
You'll need the spanner wrench to set the bearings through the axle tubes.
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Just dont buy GenuWhine Gears!
