beraad44
NAXJA Forum User
- Location
- Bell Buckle, TN
Can some one please tell me what chevy shackels will give around 2 inches of lift. i have heard the lowering ones at pepboy do this but i havent heard for sure. yes i searched
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Chevy Shackels
- Thread starter beraad44
- Start date
userbmx1315
NAXJA Forum User
- Location
- Dallas, NC
i thought chevy shackle were parallel. the ones off my brothers bronco 2 looks longer then stock ones, and they look to be the same width, havent measured them yet, even tho its upside down and would so easy.
silverslk
NAXJA Forum User
- Location
- Garbage Grove, CA
I know its not 2" but for the money the TnT 1.5" boomerang shackles are hard to beat for $77.95
buzzbombxj
NAXJA Forum User
- Location
- lake chabot
I run chevy lowering shackles, i got about 2 inches. they were about 40 bucks.
http://www.stylintrucks.com/parts.aspx?partid=12822&partfamilyid=550&subcategoryid=206&categoryid=30 Looks like they went up.
They a much better deal than an aftermarket shackle specificly for a cherokee, and they are basicly the same thing.
http://www.stylintrucks.com/parts.aspx?partid=12822&partfamilyid=550&subcategoryid=206&categoryid=30 Looks like they went up.
They a much better deal than an aftermarket shackle specificly for a cherokee, and they are basicly the same thing.
- Location
- San Bruno, CA.
Chevy drop shackles...
:looser:
:looser:
bics90xj
NAXJA Forum User
- Location
- Foothill Farms, Ca
Add a well placed guset to take care of bending.
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Why not buy a descent shackle to begin with!!!bics90xj said:
buzzbombxj
NAXJA Forum User
- Location
- lake chabot
RCP Phx said:
Exactly!
The ones i run (in the link) are braced all the way to the holes, so no colapsing like that.
600dollarxj
NAXJA Forum User
- Location
- Dayton Oh/Purdue
RCP Phx said:
if you can weld, a cheap one with some gusseting will most likely work just as well.
