• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

i have been busy

Mr.OverKill

NAXJA Forum User
i have been buisy sence the wife said she wanted the divorce and i got my new place.
the right clocking is crucial
100_0203.jpg

that is a turbo 400 with a box for rocks 231 doubler from D&D Machine and a Dana 300, a view of the combo from the drivers side
100_0191.jpg

passengers side
100_0192.jpg

and to the front of that
100_0200.jpg

yup, thats a true hi pinion Dana 60
100_0194.jpg

thats a crappy pic, i will get a better one soon, the axle is out of an 05 F350 with the radious arms, i had a tone of metal, cast and steel to cut off to get it to this point, here is some of it ( 48 lbs )
100_0195.jpg

this is what the axle looks like from the top after i cut the crap off
100_0196.jpg

well i will answer any Q's later, ask away
 
Re: i have been buisy

I get claustrophobic just looking at your 'garage'....
I really could open up some space in mine if you wanted some room to
work on that.
So whats next?
Big block?
44's?
New wife?

;)

Rick
 
Re: i have been buisy

Jump This said:
I get claustrophobic just looking at your 'garage'....
I really could open up some space in mine if you wanted some room to
work on that.
So whats next?
Big block?
44's?
New wife?

;)

Rick
ha HA, NONE OF THE ABOVE!!

2.5 fox air shox ( on order ) ( shhhhhhh ) front and rear


thanks for the invite but i dont have alot of time for the drive or money for the drive either. but for the final install i might take you up on that.
 
Re: i have been buisy

cool deal Troy! I'd imagine trussing might not be necessary but you plan on doing any?

What size meats are you running with that setup?
 
Re: i have been buisy

Finally started working on that thing, huh? Looks like a good start so far. Keep us posted.

Kyung
 
Re: i have been buisy

Mr.OverKill said:
i have been buisy sence the wife said she wanted the divorce and i got my new place.
the right clocking is crucial

You be da man Troy........SANTA
100_0203.jpg

that is a turbo 400 with a box for rocks 231 doubler from D&D Machine and a Dana 300, a view of the combo from the drivers side
100_0191.jpg

passengers side
100_0192.jpg

and to the front of that
100_0200.jpg

yup, thats a true hi pinion Dana 60
100_0194.jpg

thats a crappy pic, i will get a better one soon, the axle is out of an 05 F350 with the radious arms, i had a tone of metal, cast and steel to cut off to get it to this point, here is some of it ( 48 lbs )
100_0195.jpg

this is what the axle looks like from the top after i cut the crap off
100_0196.jpg

well i will answer any Q's later, ask away
 
Re: i have been buisy

djblade311 said:
cool deal Troy! I'd imagine trussing might not be necessary but you plan on doing any?

That thinng has like 5" tubes on it. No truss necessary for that bad boy.
 
Re: i have been buisy

cracker said:
That thinng has like 5" tubes on it. No truss necessary for that bad boy.
Dunno, were talkin "Mr.Overkill" here.

;)
 
Re: i have been buisy

cracker said:
That thinng has like 5" tubes on it. No truss necessary for that bad boy.
actually the tubes are 3 3/4" 3/8 wall tubes so i am thinking as part of the bridge for the driver side mount i might truss it as well..... we will see
 
Re: i have been buisy

Nice stuff, Troy. :)

So, the axles will be full width?
 
Re: i have been buisy

Goatman said:
Nice stuff, Troy. :)

So, the axles will be full width?

Yeah

I wanted him to take a tad off the passenger side to make the WMS 64-ish but then he'll have to get a new shaft and then shorten both rear shafts when he gets the 10.5. Too much money at this point.

Remember....Budget built ;)
 
There should be a hat passed around at the Christmas party. The boy needs to get rid of that carbed small block, something injected would be nice.
All I gotta' say is that you shouldn't follow Troy up any steep inclines!

Who loves ya' Troy?

:D
 
Did you get tour box 4 rocks setup from dd machine in washington? If so, got a website addy for him. I need to pick one up and he doesn't have them listed on ebay anymore. I have a business card for him that shows 4x4machine.com but that site doesn't exist.
 
i just called and ordered it, here is all the info i have from the pirate site
For this kit the price is $399 + $15 shipping
(paypal name is [email protected])
Duffy
D.D.Machine
(360)779-2500
 
that fawker was heavy...

and its already been to the rubicon! (loon spillway in the back of the tow rig at least :D)
 
FarmerMatt said:
That is one sexy transfer case!!!:yelclap: What's this package getting stuffed into?
my 85 Xj
100_0181.jpg

it has a SBC 350 now the pacage should be more complete and with a little trimming i can fit the 39's with full widths and air shox. all hail the plasma cutter and flap discs!! :D
 
Back
Top