Symetrical droop?

So being fairly new to this 4 link, short arm, trac bar world....Can I assume if I measure 24 inches of droop on the drivers side, I've got 24 inches on the passenger side? Fair assumption, or no?
Thanks!

There is nothing to say that it would be the same on both sides. You have multiple binding spots on each side and any of them could affect your droop on each side. TB and Steering are the most likely.

However, IF the lower control arms droop all the way down and hit the LCA mount on the axle end, then they MIGHT both be LIMITED by the bracket at the same point on both sides? Then they would both be the same.

If you are measureing for shocks? then USUALLY the drivers side is easier to droop than the pas side.

Michael