• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Mixing lifts

oldmanriver22

NAXJA Forum User
Location
Asheville, NC
I have a 3" Rough Country lift on my '00 XJ with the rear add a leafs and springs. Nothing fancy just your run of the mill lift. I have access to a dynastar 1.75" lift kit with the rear shackles and spacers for the front. Can I put this on with the 3" lift? Have you heard of any problems from doing this. A few people have said its fine and a few have said it may cause vibration of the driveshaft I think. The help is greatly appreciated and if anyone has done this let me know how it worked out.
 
Yeah, you can do it....I'm guessing you dont have an SYE. For a 2000, thats pretty much needed for anything over 3" due to the TCase output shaft length....

You can do it, but you'll probably need an SYE, longer shocks and longer brake lines if you dont already have them....
 
Back
Top