MIXEDBREED
NAXJA Forum User
- Location
- Fairfield, Ca
My bro has a 84 XJ and he shreaded his frone drive shaft and flanges. Does any one have a good line on where to get the parts??? He basically needseverything between the TCase and the front dif...
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
My brother needs front drive shaft help!!!
- Thread starter MIXEDBREED
- Start date
avnsteve
NAXJA Forum User
- Location
- South Austin or North San Antone
your local boneyard is a good place to start
old_man
NAXJA Forum User
- Location
- Loveland, Colorado
When you ask for something, you need to state not only the year but the engine size, tranny, and tcase. The length of the shaft changes depending on all of these things.
The driveshaft on the early models is only about an inch in diameter and has a CV type joint like on a front wheel drive car's axle. The most common tcase is the NP207. If it is a 4 cylinder it is the 2.5L. If it is a V6 then it is the 2.8L.
The driveshaft on the early models is only about an inch in diameter and has a CV type joint like on a front wheel drive car's axle. The most common tcase is the NP207. If it is a 4 cylinder it is the 2.5L. If it is a V6 then it is the 2.8L.
MIXEDBREED
NAXJA Forum User
- Location
- Fairfield, Ca
Thanks for the FYI. I'll try to be more specific.
