I have a 98XJ with a 3" RC lift. I noticed that the sway bar end links hit the coils in the front drivers side, but not the passenger side. Alignment was already done. I installed the same kit on my buddies XJ and the same thing happened. Not sure if it is because of the RC coils or if is a common problem. Any fixes?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Sway bar end links are hitting the coils
- Thread starter XJ9888
- Start date
WheelinJR
NAXJA Forum User
- Location
- Portland, Oregon
stock links? thats why. lengthen as needed.
XJedi23
NAXJA Forum User
- Location
- Westminster, Co.
Get some adj quick dicos. jks are good.
tgoff
NAXJA Forum User
- Location
- Eureka, CA
SEARCH. Longer ones. At least it worked for me. I went with JKS.
Look here http://www.naxja.org/forum/showthread.php?t=102538
Look here http://www.naxja.org/forum/showthread.php?t=102538
WheelinJR
NAXJA Forum User
- Location
- Portland, Oregon
as you lengthen the discos, the swaybar will rotate up and away from the coils.
XJedi23
NAXJA Forum User
- Location
- Westminster, Co.
Sway bar should be almost horizontal.
tgoff
NAXJA Forum User
- Location
- Eureka, CA
XJedi23 said:
It should be above horizontal around 10-20 degrees.
