Went wheelin, blinkers don't work now.

ZachMan

NAXJA Forum User

NAXJA Memorial Lifetime Member

Location

Birmingham, AL

• Apr 23, 2007

• #1

Went on a good wheelin trip and Jeep is covered in mud. Nothing is wrong with the Jeep besides no my turnsignal/blinkers don't work at all. Dash lights don't work, the blinkers don't blink, no sounds are made when I turn on my sinals, nothing. :confused1

 

ZachMan

NAXJA Forum User

NAXJA Memorial Lifetime Member

Location

Birmingham, AL

• Apr 23, 2007

• #2

I do know they were working before I hit the hazard switch cleaning the inside of the Jeep, now they don't work.

 

9

96GreenXJjeep

NAXJA Forum User

Location

bruin, pennsylvania

• Apr 23, 2007

• #3

check out the flasher or the relay you wik\ll have to goto the jeep dealer for the right relay

 

9

96GreenXJjeep

NAXJA Forum User

Location

bruin, pennsylvania

• Apr 23, 2007

• #4

or try the fuse's

 

SteveT

NAXJA Forum User

Location

Aurora, CO

• Apr 23, 2007

• #5

Top up the fluid

 

J

Jess

NAXJA Forum User

Location

Tennessee

• Apr 23, 2007

• #6

the grounds on the pigtails are not a good design. When mine quit working I picked up a couple new pigtails at AutoZone and wired them in and everything worked again. It cost less than $10 and took me about 45 minutes.

 

ZachMan

NAXJA Forum User

NAXJA Memorial Lifetime Member

Location

Birmingham, AL

• Apr 23, 2007

• #7

dang "hazard" switch, it was in the in-between position and it works fine now.