explorerxj
NAXJA Forum User
- Location
- el monte ca
let's me see your upgraded steering linkage with 3.5 or higher please. :wave1:
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
steering linkage upgrade
- Thread starter explorerxj
- Start date
POSJ
NAXJA Forum User
- Location
- Minot ND, Unfortunately
No more pic requests, do a search for steering in modified tech and you will probably come up with more answers than flames. If you don't know what I'm talking about go to search in the top right, click advanced search, select modified tech and in the box on the top left type in steering...good luck.
chrslefty
NAXJA Forum User
- Location
- centeral phx az
works well for me !
explorerxj
NAXJA Forum User
- Location
- el monte ca
chrslefty said:
works well for me !
is that set up from jrcoffroad? i just order one today.
chrslefty
NAXJA Forum User
- Location
- centeral phx az
no but its simmilar, it was made buy desert fab in mesa az.
- Location
- Aurora, Colorado
Offroad Only U-turn Steering.
https://secure48.mysecureorder.net/...id=49&osCsid=e6d0eb9065e6dc87222ea6858ed386cb
https://secure48.mysecureorder.net/...id=49&osCsid=e6d0eb9065e6dc87222ea6858ed386cb
Meeks
NAXJA Forum User
- Location
- Alberta, Canada
Why is there a bend in the drag link?
rockwerks
NAXJA Forum User
- Location
- Chito Beach Resort, WA
Meeks said:
to decrease the angle joints have to work on
ert01
NAXJA Forum User
- Location
- Edmonton, Alberta
RyanM said:QA1 ends, 1.5" .250 DOM. 8" of lift trac bar is 1.25" .250 DOM, JKS bracket
Why's your diff cover welded on?
- Location
- Denver, CO
ert01 said:
It's a Ford 9" axle (has a 3rd member)
CanMan
NAXJA Forum User
- Location
- Lake Tapps, WA
OTK steering is 1.25", 5/16" wall DOM with QA1 Chromo rod ends direct tapped into tube, hi misalingment spacers, and saftey washers. Need a FSJ pitman arm now though.
TB is 1.25", 1/4" wall DOM with QA1 Chromo rod ends direct tapped, custom mounts on axle and frame ends.
TB is 1.25", 1/4" wall DOM with QA1 Chromo rod ends direct tapped, custom mounts on axle and frame ends.