• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

LOOKING FOR XJ PERFOMANCE MODS

Jason Sease

NAXJA Forum User
Location
Waynesboro pa.
I HAVE A 89 XJ WITH A 94 HO MOTOR WITH RENIX COMPUTER AND SENSORS. I USED HO INTAKE HO TROTLE BODY,INJECTORS AND EXHAUST.

HERES THE QUESTION. CAN ANYONE HELP ME FIND ANY COIL PACKS ,INGNITION BOXES ETC. FOR RENIX.... 84-90 4.0

ALSO THE BEST WAY TO SET DISTR.. TIMMING.

WHILE I'M AT IT A LITTLE HELP WITH TPS GROUND ADD ON (HOW TO).

THANKS JASON IN PA (KEYSTONE KRAWLERS)
 
for a coil and stuff, check out http://www.performancedistributors.com/jeep4.0.htm
I'm not sure about the renix stuff though, it doesn't say anything about it on the site but you can always call and ask. As for adjusting the timing, correct me if I'm wrong, but its controlled by the computer and the timing is physically fixed. I'm pretty sure the renix had a mechanical advance on it also. Pretty much the only way to change it would be to cut the tab and make up an adjustable one, but I have not seen this done and chances are if your having timing issues, it lies with a sensor or there is some play in the timing chain.
The only physical change you can make to the distributor is by indexing: http://www.angelfire.com/my/fan/dist_index.html
 
Last edited:
i have the msd 6 off road ignition controller and ss coil in my 89. the ignition controller needed an adapter to connect to the renix ignition control module.

i dont have any complaints and have not had any trouble with it for 6 years now, but i cant say that it improved performance enough for the money spent.
 
Back
Top