RE HD Trac Bar Install Help

StylerG

NAXJA Forum User

Location

Oklahoma City

• Feb 15, 2007

• #1

Im in the process of installing the RE HD trac bar and HD mount, but i had already installed a trac bar that required me to drill out my axle side mount to accomodate for a larger bolt, the RE one uses the factory size bolt....so what to do????? Any suggestions?

 

J

jeepster09

NAXJA Forum User

Location

Twin Cities Minnesota

• Feb 15, 2007

• #2

Well my first thought would be to drill out the new one to fitt the larger bolt size?

 

StylerG

NAXJA Forum User

Location

Oklahoma City

• Feb 15, 2007

• #3

i dont think i want to drill out the sleeve in the bushing, basically just exposing the bushing

 

RyanM

NAXJA Forum User

Location

va

• Feb 15, 2007

• #4

sleeve from your old bushing work :dunno:

 

J

jason

NAXJA Forum User

Location

florida

• Feb 15, 2007

• #5

find some thick washers with th right size hole then put it all together then weld them or have them welded in place or use flat stock and drill the hole

 

H

Harvo

NAXJA Forum User

Location

Chattanooga

• Feb 15, 2007

• #6

I had the same problem fom using a Pro Comp lift then switching to RE. Just move over a half inch to the right and drill a new hole through both sides of the axle mount that is the size of your bolt.