cccj
NAXJA Forum User
- Location
- Daleville, AL
I am trying to replace a broken 207 t-case in my '86 Comanche. It has a 2.5l 4 cyl and a 3spd auto; is this a 904 trans? Can I swap in a NP231 (21 spline?) t-case?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
231 swap for 207 swap in MJ
- Thread starter cccj
- Start date
- Location
- Hartsville, South Carolina
Yes, been there done that. Any questions hollar!
old_man
NAXJA Forum User
- Location
- Loveland, Colorado
The swap is pretty simple but as I remember, the drive shaft lengths are about an inch different.
- Location
- Hartsville, South Carolina
Front is totally different, one is DC one is ball and cup. Rear is a little shorter but if he is lifted his stock one will work fine.
cccj
NAXJA Forum User
- Location
- Daleville, AL
It's stock for now.
Could I use a stock XJ front driveshaft?
Anybody want to swap a 23 spl 231 for a 21 spl.
Could I use a stock XJ front driveshaft?
Anybody want to swap a 23 spl 231 for a 21 spl.
- Location
- Hartsville, South Carolina
where are you?
cccj
NAXJA Forum User
- Location
- Daleville, AL
Daleville, AL
