Smittty9785
NAXJA Forum User
- Location
- SE Portland Oregon
i am running 35" tires mosty trail rig. just curios on proper gearing. 4.10's 4.56's??? please help
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
proper gears?
- Thread starter Smittty9785
- Start date
DirtyMJ
NAXJA Forum User
- Location
- Prince George, BC
There is no 'proper'.
Smittty9785
NAXJA Forum User
- Location
- SE Portland Oregon
well not proper but what would be most ideal?
bubbajeeper
NAXJA Forum User
- Location
- San Dimas, Ca
Chero-King
NAXJA Forum User
- Location
- Up here eh?
http://www.naxja.org/forum/showthread.php?t=101355
Most people go with 4.56's with 35's, then regret not going to 4.88's.
Most people go with 4.56's with 35's, then regret not going to 4.88's.
Smittty9785
NAXJA Forum User
- Location
- SE Portland Oregon
it will be on trail mostly, if i do go somewhere it will most likely be going the back roads. minor towing and minor freeway travel
piercejeeps
NAXJA Forum User
- Location
- Indiana
We have 4.56s with 32X11.50s. IMHO - I can't imagine going 35s with anything lower then 4.56. 4.88s would be the best if you are not running into the limits of a 8.25 axle and its 4.56 limit.
- Location
- Hammertown, USA
When I went to 35's, I had a 30/8.25 with 4.56's and it was not enough.
Now I have a 30 and 44 with 4.88's. I'm running 30 spline up front and about to go 35 spline in the rear.
If I were to do it again, I'd have done a 44/9" and gone 5.13 - but only for the gearing.
-C
Now I have a 30 and 44 with 4.88's. I'm running 30 spline up front and about to go 35 spline in the rear.
If I were to do it again, I'd have done a 44/9" and gone 5.13 - but only for the gearing.
-C
scorpio_vette
NAXJA Forum User
- Location
- Milwaukee Wisconsin
dana 44 front and rear with 5.38 gears. 
mjma
NAXJA Forum User
- Location
- Rehoboth, MA
4.88
