-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Do any aftermarket companies make.......
- Thread starter Ted Young
- Start date
- Location
- Hammertown, USA
Yes. It's way too stiff, you don't want it. 
It's the same mount as the AW4 one IIRC. I had one on my jeep for about an hour.
http://www.rockymountainsusp.com/W_poly_Jeep.htm#Tranmission Mounts
It's the same mount as the AW4 one IIRC. I had one on my jeep for about an hour.
http://www.rockymountainsusp.com/W_poly_Jeep.htm#Tranmission Mounts
cal said:Yes. It's way too stiff, you don't want it.
It's the same mount as the AW4 one IIRC. I had one on my jeep for about an hour.
http://www.rockymountainsusp.com/W_poly_Jeep.htm#Tranmission%20Mounts
Thanks, man. I skipped on the trans mount when I put in the lift when I had everyting apart and thought I'd ask - that sucker was beat. My dad put a poly trans mount in his '69 mach 1 and the reduced flex really helped it hook up (I'm the only one who gets to drive it besides him so I'd know
. But then again, this is JEEP, not a muscle car!
- Location
- Hammertown, USA
Put a stock mount in. it takes about 20 minutes and is very, very easy. 4 bolts for the cross member, 4 at the bottom of the trans mount, two at the top. Put a good solid jack under your transmission to hold it up while you do the swap.
I think I paid $24 for my stock mount at autozone.
I think I paid $24 for my stock mount at autozone.
