93XJMan
NAXJA Forum User
- Location
- Fort Wayne Indiana
Anybody know if a factory transfer case skid plate off of a 1999 XJ will work on a 1993 XJ?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Factory T-Case skid
- Thread starter 93XJMan
- Start date
2000XJSPORT
NAXJA Forum User
- Location
- Illinois
It should work fine.
Alex
Alex
93XJMan
NAXJA Forum User
- Location
- Fort Wayne Indiana
Will it work if I lower the transfer case when I lift?
2000XJSPORT
NAXJA Forum User
- Location
- Illinois
I am not completely sure. I think it depends on how far down you drop it. There is some room between the T-Case and the skid. Below is a picture of my skid plate with a NP231 Command Trac T-Case. Stock position. Hope this helps.
Alex
Alex
93XJMan
NAXJA Forum User
- Location
- Fort Wayne Indiana
Cool, thanks. I plan on lifting my Jeep with the 3" OME lift, and I thought that the t-case may need lowered if I get vibes
- Location
- Minneapolis, MN
Go-Jeep has info on how to make your own T-case spacer. http://go.jeep-xj.info
This my np231 lowered 1" with Go-Jeep spacers. Search for info on Tcase lowering, the studs can be a real pain to remove.
.
This my np231 lowered 1" with Go-Jeep spacers. Search for info on Tcase lowering, the studs can be a real pain to remove.
.
