bigwhitey
NAXJA Forum User
- Location
- Brunswick, ME.
Finaly got the skid for my fulltraction kit today.
Eats up very little clearance.
Eats up very little clearance.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Full traction skid
- Thread starter bigwhitey
- Start date
Skullver
Still Flailing
- Location
- Ventura,CA
I have one also, nice peice.
Did you mount your rock rails to the FT LCA mounts? I would like to see some more pictures of your underbelly if at all possible, you can email them or post here if you do, whatever is easier. I am looking for ideas as far as welding the FT brackets to unibody and building some sliders that tie it all together. TIA
Chris
Did you mount your rock rails to the FT LCA mounts? I would like to see some more pictures of your underbelly if at all possible, you can email them or post here if you do, whatever is easier. I am looking for ideas as far as welding the FT brackets to unibody and building some sliders that tie it all together. TIA
Chris
bigwhitey
NAXJA Forum User
- Location
- Brunswick, ME.
I'll take some more pics this week. I used 1/4 3X3 infront to the bend and behind the mounts to the leaf mount. Then I weled on the steps/sliders to that and a piece of angle at the pinch seam.
On the brackets I just followed a straight line up and welded what ever touched the angle. You could spend alot more time and trace the shape of the bracket and cut it from the angle but that seemed pointless to me.
And yes using an ARC welder on the unibody sucks.
On the brackets I just followed a straight line up and welded what ever touched the angle. You could spend alot more time and trace the shape of the bracket and cut it from the angle but that seemed pointless to me.
And yes using an ARC welder on the unibody sucks.