Mcstiff
NAXJA Forum User
- Location
- Boulder, Co/ Lansdale, Pa
Can I use the coil from a 89 4.0 in a 86 2.5? If not anybody have a coil for a 2.5 for sale?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Coil Question
- Thread starter Mcstiff
- Start date
martin
NAXJA Forum User
- Location
- Huntsville, AL
Why not go to www.rockauto.com and look up the coil for both applicatoins and see if it is the same Delco/Standard part number. That should pretty well figure it out.
sidriptide
nobody of any consequence
- Location
- western massachusetts
as far as i know it is the same coil.... ICM will most likely not work...
mike
mike
Mcstiff
NAXJA Forum User
- Location
- Boulder, Co/ Lansdale, Pa
Well the PN is the same I guess I'll try it out.
96xjeeper
NAXJA Forum User
- Location
- Fort Leonardwood, MO
Well one question, are you swapping just one spring? Why? I would say swap both springs that way any difference is equel.
Mcstiff
NAXJA Forum User
- Location
- Boulder, Co/ Lansdale, Pa
my jeep only has one, I thought thats how they all were
