xjdavid1
NAXJA Forum User
- Location
- Brisbane Australia
Do I need to trim the rear fender to fit 32x11.5x 4" on RE 4.5" lift. I have 2" bump stop extenders on the rear.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Do I need to trim the rear fender to fit 32x11.5x 4" on RE 4.5" lift
- Thread starter xjdavid1
- Start date
BattyBlueXJ
NAXJA Member #1270
- Location
- Albany, NY
If you bumpstop properly you will be fine. If your using RE leaf and springs you will prob sit 5"-5.5" when its all said and done.
Jeffro600
NAXJA Forum User
- Location
- Cheyenne, Wy
Doubtful at first....i run a RE 4.5 with 33's and i dont even come close to the bump stops or the rear fenders. The leafs are very stiff from the factory....ive had mine on for probably 6-7 pretty hard trail runs and their just now starting to break in a bit. I will be trimming here pretty quck through.
FitchVA
NAXJA Forum User
- Location
- Roanoke, VA
yes you will. ...at least i did
some carnage that the tires did
the rest... http://viewsfrommylens.com/Gallery/album37
that happened and i still wasn't close to my bumpstops.
so i trimmed...
pleanty of room now.
i have a set of dpg adj. bumpstop plates that will be going on so i keep from inverting my leafs
some carnage that the tires did
the rest... http://viewsfrommylens.com/Gallery/album37
that happened and i still wasn't close to my bumpstops.
so i trimmed...
pleanty of room now.
i have a set of dpg adj. bumpstop plates that will be going on so i keep from inverting my leafs
