JaysXJ
NAXJA Forum User
- Location
- Louisville, KY
I may be doing a s-10 leaf spring upgrade and would like to know were can I purchase replacement leaf spring clamps? Thanks.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Replacement leaf spring clamps
- Thread starter JaysXJ
- Start date
- Location
- Terra Firma
Local spring shop, if there's one near you. If not, try www.huskyspring.com
What you're looking for is called "rebound clips."
http://www.huskyspring.com/main.taf?cat=160
What you're looking for is called "rebound clips."
http://www.huskyspring.com/main.taf?cat=160
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
If you want your springs to flex to their maximum,youll need to use the "open" style.You can easily make them,attaching them is alot harder!
DSN46
NAXJA Forum User
- Location
- Columbia, MO
I just finished the S-10 lift myself. I made my own spring clamps using 1" strap steel. I cut the straps 7" long and bent them to fit around the leaf pack. Then I drilled 3/8 holes near the ends so that I could just barely slide a grade 8 bolt through on the top side of the pack. Then I tightened the bolts down just tight enough that the clamps didnt move, but not too tight.
Just yet another idea for ya out there.
As a matter of fact, I got the idea from a local 4X4 shop, then that idea was re-enforced when I found a write up on the S-10 leaf pack build. (Sorry, I can't remember the exact address to the write-up. Maybe someone else knows off the top of their head?)
Good luck!
Just yet another idea for ya out there.
As a matter of fact, I got the idea from a local 4X4 shop, then that idea was re-enforced when I found a write up on the S-10 leaf pack build. (Sorry, I can't remember the exact address to the write-up. Maybe someone else knows off the top of their head?)
Good luck!
