• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Rock rails and Bushwacker Flares options

XJCRAWLER

NAXJA Forum User
Trying to make some rails that will work with my flares using double 2x2 tubing. The problem is with opening the back door and the flare hitting the rail. I was looking for some pictures but haven't had much luck using the search as all I've found were post without the flares. Trying to get this done before Dixie Run.
Thanks,
Bill
 
XJCRAWLER said:
Trying to make some rails that will work with my flares using double 2x2 tubing. The problem is with opening the back door and the flare hitting the rail. I was looking for some pictures but haven't had much luck using the search as all I've found were post without the flares. Trying to get this done before Dixie Run.
Thanks,
Bill
Your building the rails,so move them till they clear???
 
had to cut my rear flares to clear welded on rails as well... you cannot tell looking at it... let me mention that that plastic will re-glue itself as you cut from the heat of cutting... was pretty funny to do...
 
same here. I just trimming the bottom of the flares to clear the rails.

bw25.jpg
 
Back
Top