Rubi Np241J onto an '89 AW4(21spl)

C

cLAYH

NAXJA Forum User

Location

Calgary, Alberta, Canada

• May 9, 2005

• #1

Does anyone know if there was ever made a 23 spline AW4 for the non-HOs? I can buy a Rubi T-case but its 23spl and my AW4 is 21spl. If not can a 23spl shaft from a HO be swapped into a non-HO case?

Also what are people doing about the speedo? Is there anyway to put on a mechanical drive?

 

C

cLAYH

NAXJA Forum User

Location

Calgary, Alberta, Canada

• May 9, 2005

• #2

Just occured to me that it would be easier to swap in the whole 23spl AW4 and deal with the wiring differences. Must be late.

Anyone what has to be done to the wiring to get the HO AW4 to work in the Renix system? I searched and there are other who have asked but no ansewers other than is possible. Thanx.

 

C

calmarkid2002

NAXJA Forum User

Location

Rio Vista, CA

• May 9, 2005

• #3

I have interchanged them with no problems, everything worked fine, that transmission has since died of "natural" causes, but the wiring seemed to work ok. Hope that helps.

 

BrettM

NAXJA Forum User

Location

michifornia

• May 9, 2005

• #4

no issues with wiring from 87-96.

 

C

cLAYH

NAXJA Forum User

Location

Calgary, Alberta, Canada

• May 9, 2005

• #5

I've heard that the plug is different on the tranny and some splicing will need to be done. Is this true or is it plug and play?

 

BrettM

NAXJA Forum User

Location

michifornia

• May 9, 2005

• #6

plug is identical between 87 and 96, it changed in 97. some wires may be colored differently, but it doesn't matter. plug and play, almost too easy.

 

C

cLAYH

NAXJA Forum User

Location

Calgary, Alberta, Canada

• May 9, 2005

• #7

Great thats what I needed to know! Thanks!