Jerms
NAXJA Forum User
- Location
- Northern utah
I have an 88 that is ver tired and leaking worse than anyother vehicle i have ever seen and with 278K i think that it is time for a rebuild. where would you guys suggest getting engine kits from?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Best place to get engine kits
- Thread starter Jerms
- Start date
fizassist
NAXJA Member #1052
- Location
- Los Alamos, NM
just tagging because I'm interested too...
prb24
NAXJA Forum User
- Location
- Cortland, NY
I'm not sure on the quality of the stuff in the kits, but P.A.W. has a catalog about 4 inches thick, with the 1st 2 inches being engine kits.
http://www.pawinc.com/
http://www.pawinc.com/
sappersly
NAXJA Member #1352
- Location
- Fort Carson, CO
I have had this place saved for a while. I like the warranty and when you add the parts, maching work etc.
http://www.rebuilt-auto-engines.com/
http://www.rebuilt-auto-engines.com/
aviationstation
NAXJA Forum User
- Location
- Peoples Republic of Kahlifornya
All,
This is my first post to this forum. Long time reader, short time "poster." Anyway, I have a 94 that I'm about to yank & rebuild. I've located a supplier that has the kits for $425.00 (with cam!) out the door. That's delivered for less than $500. Boring is $20 bucks a hole & I'll add around $200 for the head. That's $750.00 for a fresh mill. Not too bad! That'll bump up a little, but the meat of the project is under a grand, and you can play with the porting while your assembling it.
Just a thought for anyone still looking to rebuild...
M Randolph
Fallbrook, CA
========
The dirt toys...
2000 Cherokee Sport 4x4
1994 Cherokee Sport 4x2 (i know, why bother)
The asphalt ones...
1972 El Camino
1969 GTO 400/400
1967 Chevelle SS 396
1967 Malibu
1966 Nova II
and one ticked off wife!
This is my first post to this forum. Long time reader, short time "poster." Anyway, I have a 94 that I'm about to yank & rebuild. I've located a supplier that has the kits for $425.00 (with cam!) out the door. That's delivered for less than $500. Boring is $20 bucks a hole & I'll add around $200 for the head. That's $750.00 for a fresh mill. Not too bad! That'll bump up a little, but the meat of the project is under a grand, and you can play with the porting while your assembling it.
Just a thought for anyone still looking to rebuild...
M Randolph
Fallbrook, CA
========
The dirt toys...
2000 Cherokee Sport 4x4
1994 Cherokee Sport 4x2 (i know, why bother)
The asphalt ones...
1972 El Camino
1969 GTO 400/400
1967 Chevelle SS 396
1967 Malibu
1966 Nova II
and one ticked off wife!