-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
tj flares
- Thread starter honda12
- Start date
nhrocker
Jackstand wheeler
- Location
- Claremont, NH
Do a search. It will turn up more answers than just starting a new post.
There were at least a few good ones in the past week or two alone.
Look for things like "fender chop", "TJ flare", you get the idea. A couple had links to other sites for even more info.
There were at least a few good ones in the past week or two alone.
Look for things like "fender chop", "TJ flare", you get the idea. A couple had links to other sites for even more info.
SlippinandSlidin
NAXJA Forum User
- Location
- Pennsylvania
This is what I used.
http://www.rightcoastcrawler.com/billaVista/Fender_flares/TJflares.htm
Good luck
http://www.rightcoastcrawler.com/billaVista/Fender_flares/TJflares.htm
Good luck
rust bucket xj
NAXJA Forum User
- Location
- allentown pa
what exactly are you un sure of, up front just hold them in place trace with a sharpy cut.
On the ass end if you want to weld it back up you do the same process if not just fold the pinch see over with a few release cuts
there are pics of my rig floating around with them
On the ass end if you want to weld it back up you do the same process if not just fold the pinch see over with a few release cuts
there are pics of my rig floating around with them
COXJ
NAXJA Member #989
- Location
- Golden/ Arvada, CO
he has problums with cutting things and how to put fender flares on look at his SN HONDA. lol JK just surch this topic has ben beet to death Hasta
Liam
Liam
- Location
- Port Orchard, WA
i like the looks of this one....
http://www.madxj.com/
http://www.madxj.com/
xjj33p3r
NAXJA Member #1108
- Location
- garland, tx
Position the flare were you want it, use nail polish to mark the holes to drill. Have someone else hold the flare of course, but that's how I did it, and all the flares came out perfectly even.
