1992 torque specs

im just looking for the engine torque spec, ive looked every where and i cant find them, could someone give me a link or something, i know theres going to be a few who give greif for asking this but im getting frusterated

thanks

or just email them to me

[email protected]

Torque Specifications COMPONENT TORQUE
A/C Compressor Bracket-to-Engine Bolts 34 Nm (25 ft. lbs.)
A/C Compressor Mounting Bolts 27 Nm (20 ft. lbs.)
A/C Low Pressure Service Valve Nut 38 Nm (28 ft. lbs.)
Alternator Adjusting Bolt 24 Nm (18 ft. lbs.)
Alternator Pivot Bolt/Nut 38 Nm (28 ft. lbs.)
Camshaft Sprocket Bolt 108 Nm (80 ft. lbs.)
Connecting Rod Nuts 45 Nm (33 ft. lbs.)
Crossmember-to-Sill Bolts 41 Nm (30 ft. lbs.)
Crankshaft Pulley-to-Damper Nut 27 Nm (20 ft. lbs.)
Cylinder Head Bolts Tightening Sequence Image




Step 1: Tighten bolts # 1-14 30 Nm (22 ft. lbs.)
Step 2: Tighten bolts # 1-14 61 Nm (45 ft. lbs.)
Step 3: Check all bolts 61 Nm (45 ft. lbs.)
Step 4: Tighten bolts # 1-10 149 Nm (110 ft. lbs.)
Step 5: Tighten bolt # 11 (use thread sealer) 135 Nm (100 ft. lbs.)
Step 6: Tighten bolts # 12-14 149 Nm (110 ft. lbs.)
Cylinder Head Cover Bolts 10 Nm (85 in. lbs.)
Engine Support Bracket Bolts 61 Nm (45 ft. lbs.)
Exhaust Manifold-to-Downpipe Nuts 27 Nm (20 ft. lbs.)
Flywheel/Flexplate Bolts 143 Nm (105 ft. lbs.)
Flywheel/Converter Housing Bolts 38 Nm (28 ft. lbs.)
Front Cover-to-Block Bolts 7 Nm (60 in. lbs.)
Front Support Bracket-to-Cylinder Block Bolts 61 Nm (45 ft. lbs.)
Front Support Cushion-to-Mount Thru Bolt 65 Nm (48 ft. lbs.)
Front Support Cushion-to-Sill Bracket 41 Nm (30 ft. lbs.)
Fuel Pump Bolts 22 Nm (16 ft. lbs.)
Main Bearing Bolts 108 Nm (80 ft. lbs.)
Oil Filter 18 Nm (13 ft. lbs.)
Oil Galley Plug 41 Nm (30 ft. lbs.)
Oil Pan Bolts 1/4-20 13 Nm (114 in. lbs.)
5/16-18 18 Nm (156 in. lbs.)
Oil Pan Drain Plug 41 Nm (30 ft. lbs.)
Oil Pump Attaching Bolts Short 14 Nm (10 ft. lbs.)
Long 23 Nm (17 ft. lbs.)
Oil Pan-to-Timing Cover Bolts 8 Nm (70 in. lbs.)
Power Steering Pump Pressure Hose Hut 52 Nm (38 ft. lbs.)
Rear Support Bracket Stud Nuts Automatic Transmission 75 Nm (55 ft. lbs.)
Manual Transmission 46 Nm (34 ft. lbs.)
Rocker Arm Assembly-to-Cylinder Head Capscrews 28 Nm (21 ft. lbs.)
Spark Plugs 37 Nm (27 ft. lbs.)
Starting Motor Mounting Bolts 45 Nm (33 ft. lbs.)
Timing Case Cover-to-Block Bolts 7 Nm (60 in. lbs.)
Vibration Damper Bolt 108 Nm (80 ft. lbs.)




And disregard my PM.