jeepguy97
NAXJA Forum User
- Location
- clearfield, pa
Check this for me please. I'm going to wire up a lighted switch to control my electric cooling fan. I have a 97 XJ so I need to run a relay in order to not back feed the ECU. I planed on running from terminal 30 on the relay to the battery, terminal 85 to ground, terminal86 to the switch, and terminal 87 to the fan (via a 3M tap to the positive fan wire). Terminal 87a wouldnt be used. Is this correct? Then i just run a wire from the switch to a 12V source for the lighted feature and one to ground correct.
