BIG NASTY
NAXJA Forum User
- Location
- Cedartown, GA
I have a Dana 44 in an 87 XJ......I still can't find the ratio. What came with the 44's? Is it Trac-loc?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Ratio Question ???
- Thread starter BIG NASTY
- Start date
jneary
NAXJA Forum User
- Location
- springfield, virginia
if you dont see the ratio stamped on th i.d. tag on the rear diff cover, look for it on the front diff. the ratios have to be the same.
BIG NASTY
NAXJA Forum User
- Location
- Cedartown, GA
would it be on the long tube of a D30 ?
jneary
NAXJA Forum User
- Location
- springfield, virginia
it should be on the i.d. tag bolted to the diff cover
BIG NASTY
NAXJA Forum User
- Location
- Cedartown, GA
of course its missing....front and back...just my luck
jneary
NAXJA Forum User
- Location
- springfield, virginia
then you need to remove one of the diff covers and count the number of teeth on the ring gear and divide it by the number of teeth on the pinion gear. if both rear wheels spin in the same direction by hand while in the air it is limited slip if they spin in opposite directions then it isn't
- Location
- Terra Firma
'87 XJ. If it's a 4.0L, 5-speeds were 3.07 and automatics were 3.54.
If it's a 4-cyl, could be 4.10, 3.73, 3.54 or even 3.31.
If it's a 4-cyl, could be 4.10, 3.73, 3.54 or even 3.31.
