thompson97
NAXJA Forum User
- Location
- harrisonburg, va
just like the title. doing a little routine maintainence today, and i need to check the level in the t-case, but don't have a socket that large. what do i need to pick up.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
transfer case socket size
- Thread starter thompson97
- Start date
staticrevolution
NAXJA Forum User
- Location
- Beaverton, OR
My 96 doesnt have bolts for the fill and drain plugs it has what I would call large set screws with a hex pattern. Must be different on the 97 and newer. Can anyone else shed some light on this or is it just a difference in the two years.
thompson97
NAXJA Forum User
- Location
- harrisonburg, va
thanks, that sounds about right.
CaptTrev
NAXJA Forum User
- Location
- Long Island
my 96 with the 242 uses 30mm also. . .
thompson97
NAXJA Forum User
- Location
- harrisonburg, va
updated
good to go. but check this out. while i was down there, i changed my speedo gear to a 36 tooth to compensate for my 33's. funny thing is, i had been having a hesitation at about 3000 rpms that i had assumed was a bad tps, but after putting in the new gear and changing the fluid...gone. anyone ever heard of an incorrect speedo gear having this effect on acceleration?
good to go. but check this out. while i was down there, i changed my speedo gear to a 36 tooth to compensate for my 33's. funny thing is, i had been having a hesitation at about 3000 rpms that i had assumed was a bad tps, but after putting in the new gear and changing the fluid...gone. anyone ever heard of an incorrect speedo gear having this effect on acceleration?
