barneycj-8
NAXJA Forum User
- Location
- Orem, UT
When I gradually slow down to a stop, and the shifter is in position 3 or OD it will not shift all the way down to first. It does however shift down to all the othe gears IE OD to third then down to second. It will also shift down into passing grear under hard acceleration. I havent tried it in 4-lo I will when I get off of work. As far as the TPS I checked the voltage at the TPS unit also where those wires feed into the TCU. At both locations with throtle closed it reads .75 volts gradully incrases as throtle is increased. Only funny thin is at full throtle the fluke reads Over load, but that is only at full open I'm not sure if it the meter or TPS. Could this be my problem I am going to try the reading with another meter tomorrow. 