no start

O.K. it has a new cps started fine moved the turd went to start crank no start fuel pressure at the rail no fire at wires, do not know poop on the primary and secondary ignition system please help on what to check and locartions. thanks
Valleytroll

You said no fire at the wires, is that no fire at the spark plug end ? If so I would start with the dist cap and rotor, take a good look at the contacts, then jump back and see if your getting spark from the coil to the cap. If not, could be a bad coil, check to make sure your getting voltage at the coil from the switch, if not, could be a bad ignition switch. Another good thing to check are your grounds, make sure you have a good engine to chassis ground, thats caused a few troubles for me over the years. Hope that gives you someplace to start, good luck.